Home / News / Body Armor Buyers Guide

Body Armor Buyers Guide

  • Body Armor: The Ultimate Buyer’s Guide to Choosing the Best Body Armor.
    Body Armor Basics: Restrictions, Components and Composition

    Do civilians have the right to own body armor?
    You might be shocked to find that practically anyone is allowed to own or use body armor in all 50 states in the United States. Customers frequently believe that it's unlawful to acquire this kind of safety equipment unless they work as first responders, law enforcement officers, or military personnel, but that's just untrue.

    Body armor is completely lawful, with the following exceptions:
    You must be a law-abiding civilian who only plans to use your armor in ways that are allowed.
    A crime cannot be committed while wearing armor. Legal sanctions for such behavior will dramatically increase.
    You cannot be wearing your armor if you have ever been convicted of a violent felony or have any intentions of doing so.
    If you reside in Connecticut, you must either buy your armor in person from a nearby dealer or order it online and have it delivered to them so you may pick it up. In the aforementioned state, this goods cannot be sent directly to a citizen.

  • Why did I learn that owning body armor is prohibited?

    A common complaint is "I tried to order from another company and they told me that only law enforcement officers could own armor." Many people think it's illegal to own body armor as a result of this kind of contact. You must be aware that a sizable portion of producers and merchants limit their sales to law enforcement only. These limitations, however, are based on specific company policies and do not correspond to national, state, or local legislation. Upstanding citizens may wear, acquire, and own body armor without any restrictions. All morally upright and ethically oriented persons can get the greatest body armor from Safe Life Defense without any discrimination. You can buy our body armor as long as you abide by the law. Since everyone has the privilege and right to acquire these products for protection, we will never limit our sales to only professional occupations. Body armor is a vital safety device created for mental clarity, damage avoidance, and life preservation. We think it ought to be treated as such and made available to everyone who satisfies these requirements.

  • Body Armor

    While it might not provide as much protection as other types, soft armor is typically preferred by those seeking a more comfortable solution. Soft armor can flex and is quite light for increased comfort. Because of this, it is the most covert sort of body armor and a fantastic choice for people who don't want to feel like they are carrying around extra weight. The majority of pistol rounds can be stopped by soft body armor.

  • Bulletproof Plates

    Chowey is a professional manufacturer of police and military equipment, including bulletproof plates. They also make ballistic helmets and bulletproof boards. Chowey mainly serves bulk purchasers and has a minimum order quantity. 

    Ballistic plates are designed to stop projectiles like 7.62x51 NATO, 7.62x39 MSC, 5.56x45 SS109, and 7.62x63 AP. They come in NIJ levels 3, 3+, and 4. 

    Body armor plates are made of strong fibers that are tightly woven in a perpendicular weave. When struck by a bullet, the plates spread the energy and deform the bullet, which reduces blunt force trauma to vital organs. 

    The most common grade of ballistic protection steel is high hardness armor steel (HHA). HHA with a thickness of 6.5 mm is usually enough to protect against a NATO standard 5.56 mm calibre bullet SS109. 

  • What components make up body armor?

    Fiber from Para-Aramid

    Ballistic material has long relied on para-aramid fiber as its standard. It is more flexible (and comfy) than other alternatives and five times as strong as steel. This specific fiber is particularly resistant to abrasion damage, has a higher melt point of 750 degrees Fahrenheit, and maintains favorable backface signature ratings under impact. Therefore, there will be less deformation and general blunt force stress. Although aramid fibers have been tried, tested, and proved in war, it's still necessary to control moisture and shield your vest from UV radiation. Para-phenylenediamine and terephthaloyl chloride are combined to generate aromatic polyamide threads, which are subsequently refined and weaved into the panels to create some of these fibers, such as Kevlar. 

    After doing a lot of study into other ballistic possibilities, we chose to employ a para-aramid that was specially made for all teuron-based soft body armor. Our vests are bullet, strike, and slash resistant thanks to this inventiveness, and our improved IIIA+ panels are also resistant to stabs, Tasers, and specific threats. Aramid fibers have already saved countless lives and will do so for a very long time.

  • Zylon 

    Zylon is a synthetic polymer of low quality that is created from several thermoset liquid-crystalline polyoxazoles. It has a good thermal stability and is stiffer than steel. Keep this term in mind, keep away from it, and if you already have Zylon body armor, get rid of it right immediately! Numerous agencies have banned Zylon because to widespread recalls and faults that caused wearers to suffer serious or fatal injuries. The United States' federal, state, municipal, and tribal law enforcement organizations recently acquired body armor constructed of Zylon and had firsthand experience with this. This substance is NOT advised since the risk is not worth it and it has been demonstrated to fail in a number of circumstances.


    Nanocarbon tubes

    A brand-new allotrope substance made of cylindrical carbon molecules is called a carbon nanotube. Covalently bound atoms are arranged in a hexagonal network that makes up each single-walled nanotube. They are reported to be more than 100 times stronger than steel when knit together! Strong, light, flexible, and able to absorb a significant amount of energy due to their great elasticity are CNTs. Before this material is fully commercialized, more testing and research are still required, despite the fact that preliminary results indicate enhanced impact puncture and penetration resistance.


    CNTs hold enormous promise for usage in body armor in the future thanks to their improved defense against the effects of blunt trauma. However, one of the challenges that producers will have is the prohibitive cost of production. Perhaps in the future, carbon nanotubes will be the norm, but that won't happen until prices are much lower.


    Steel

    Steel is a very affordable material, which is one of the reasons it is used so frequently in body armor. Another factor is that it requires very little maintenance and frequently outlives other solutions. Steel comes in two different varieties: Mil-Spec A46100 and AR500 Steel. Although the first of these is frequently used to make shooting targets and tough rifle plates, it is not approved by the NIJ. It is rated to stop both small guns and explosive shrapnel, and is the same kind that the American military uses for vehicles.Steel plates can withstand many impacts without breaking if you're trying to stop a bullet moving faster than 3,000 fps. It does have certain drawbacks, despite these benefits. Steel armor can ricochet, the weight of the plates can be painful, and the stiffness can severely limit movement. Standard 1012 steel armor slabs can weigh up to 15 pounds, so front and back protection could weigh 30 pounds or more! It's not always practical to lug all that extra weight around every day.


    However, if you do not want to spend the money on a more sophisticated ballistic material, it is an excellent material. Anything is preferable to nothing. if you choose to use steelMake sure the steel armor has an anti-spall coating if you choose to use it. This is essential for capturing deadly shrapnel after bullets strike and shatter in all directions. The good news is that there are now better, lighter solutions available on the market that will even defend against shots that can penetrate steel body armor if you're still looking for better body armor.


    Ceramic

    Most contemporary ceramic armor is constructed from a composite based on boron carbide. It has the advantage of being lightweight and maintaining a very high level of toughness despite being as thick as steel. Ceramics are actually one of the toughest materials for ballistic protection and are more effective than steel at absorbing and dispersing energy.As a result, there are fewer fractured ribs, broken sternums, and post-impact lung collapses. Ceramic outperforms steel when tested against supersonic armor-piercing projectiles.


    If you've never worn a ceramic plate, you'll discover immediately that they can significantly limit your range of motion. And it's likely that you'll need to be able to move swiftly if you're wearing body armor to protect yourself. However, there is a more important justification to avoid using entire ceramic plates: they break on impact and need to be handled carefully. Fractures can be very impossible to spot, and in certain situations, getting an x-ray is the only surefire way to find one.

  • National Institute of Justice (NIJ) Protection Body Armor Levels

    What does the “NIJ Rating” of body armor mean?

    The single most important thing to look for when shopping for body armor is the National Institute of Justice (NIJ) Rating. This rating is the ballistic standard of resistance used in the U.S. and throughout most of the world. Body armor becomes NIJ rated when it passes a strict set of guidelines at a NIJ certified 3rd party ballistic laboratory. The NIJ has been setting standards since 1972, and they’re the only nationally accepted baseline for the body armor worn by law enforcement and corrections officers. It’s the highest level of certification available and a long process for products to get their backing on ballistic performance, which means you can rest assured you’re getting nothing but the best. All Safe Life Defense products undergo ballistic testing at the NIJ-Certified, Oregon Ballistics Laboratory, and our results are always posted on each product page.


    What are the different NIJ rating protection body armor levels?

  • NIJ Level II

    What will a level II plate stop?

    Level II armor will stop most common handgun rounds including 45 ACP, 9mm, .40 S&W and .357. The National Institute of Justice specifies that level II armor must stop 9mm fmj bullets with a mass of 124 grains and a velocity of 1,305 ft/s as well as .357 Magnum jsp with a mass of 158 grains and a velocity of 1,430 ft/s.


    NIJ Level IIIA

    What will a level IIIA plate stop?

    Level IIIA armor reliably defends against all common handgun rounds including .357, 9mm, 45 ACP, all the way up to .44 Magnum. Level IIIA protects the wearer from shotgun rounds including 00 buckshot, 12 ga. slugs and even submachine gun rounds. In conjunction with our level IV rifle plate, our armor protects against rifle threats all the way up to .30-06.


    Enhanced Multi-Threat Level IIIA+

    What will a level IIIA+ enhanced multi-threat™ plate stop?

    Level IIIA+ armor is an innovative protection category that is offered exclusively through Safe Life Defense. This enhanced soft armor not only protects against the same threats as our traditional IIIA but also includes NIJ Level 1 spike protection for up to 36 joules of stab force and protection against armor-piercing handgun ammunition such as Liberty Civil Defense 9mm and FN 5.7×28 40 gr. The unique bullet, strike, slash, stab, Taser and special threat resistance found in Safe Life Defense IIIA+ armor make it the world’s most powerful soft body armor!


    Our IIIA+ model has the largest number of reported saved lives due to its strike resistance (an often undervalued feature) that has kept people alive after being hit by motor vehicles, falling from a significant height and taking on blows from a blunt weapon. The second-largest number of saves come from stabbings. Most reports end up saying, “My doctor said without this vest there’s no chance I would be alive today.”


    NIJ Level III

    What will a level III plate stop?

    Level III armor is a hard armor rated for rifle protection. Level III armor is rated to withstand 7.62 mm FMJ (US military M80) rounds with a mass of 147 grains and a velocity of 2780 ft/s. Yes, level III will defeat an AK-47 round.


    FRAS™ Standalone and ICW

    What will a FRAS™ plate stop?

    FRAS™ is a new level of flexible rifle body armor we developed to bridge the gap between level III and level IIIA. FRAS™ is rated to defend against the most common rifle threats someone may encounter on duty, including 5.56, ss109 and m193 as well as 7.62×39 — predominantly AR-15 and AK-47 rounds. Safe Life Defense FRAS™ provides full torso coverage from rifle threats with a phenomenal balance of protection, weight and coverage. When worn in conjunction with a level IIIA vest, our FRAS™ is rated III+ for rifle protection up to .308 and 7.62x54R!


    NIJ Level IV

    What will a level IV plate stop?

    Level IV armor is the highest rating of body armor currently available, and it will stop armor-piercing rifle threats. It can withstand up to 30-06 M2ap steel core armor-piercing rounds with a mass of 166 grains and a velocity of 2880 ft/s. Many people choose to have a Level IIIA vest accompanied by in conjunction with (ICW) rifle plates to achieve a higher level of protection. Safe Life Defense offers lightweight level IV ICW rifle plates that are designed to slide into low-profile pockets on our level IIIA vests. This allows you to adapt your armor to a variety of threat levels without making it too cumbersome for daily use.

  • What NIJ rating is best for me?

    The best level of body armor for you depends on your personal needs and wants. First, ask yourself, “Do I need protection against handguns, shotguns, rifles or all three?” Then ask yourself, “Do I also need to be protected from bladed weapons, Tasers, blunt-force trauma or all three?” Lastly, evaluate your expectations for this life-saving piece of equipment. Remember, except for FRAS™ vests, there is a direct trade-off between protection, comfort and concealability. Generally, the higher the protection level, the heavier and less concealable the armor. The best armor for you is the armor you’ll actually wear. With that in mind, it is highly beneficial to select the lightest option that will protect you from the threats you are most likely to encounter.


    If you are like most of us and need protection from handguns as well as shotguns you’ll want to select body armor like the Safe Life Defense Multi-Threat Vest. It comes in level IIIA (which is great for threats all the way up to 12 gauge slugs!) Nowadays, most people are deciding to go with one of our most popular options, the IIIA, because it offers a great deal of protection while still being lightweight and easily concealable. Safe Life Defense Multi-Threat Vests are also strike and slash-resistant! Protection from bullets, bats, and blades? We’ve got you covered.


    If you anticipate you’ll need to face a rifle-related threat, then you’ll want to get some heavy-duty gear. For this type of protection, you can select one of two types of armor: (1) Hard body armor, which is rated NIJ III and IV. This type of armor will be much heavier and less concealable than the majority of soft armor, but the tradeoff is a much higher level of protection. Or (2) Safe Life Defense’s Revolutionary FRAS™ body armor, the most versatile, comfortable and protective option. Our Multi-Threat Armor System will also work with removable rifle plates that can be used with a level IIIA vest for adjustable levels of protection (IIIA to IV). You’ll have all the benefits of Level IV armor without sacrificing wearability!


    Body Armor Maintenance, Storage and Care

    Can I test shoot my armor?

    WARNING: Testing your body armor is NOT recommended and you should NEVER test armor while you or any other living being is wearing it. Failure to follow this guidance can lead to a major safety hazard, serious injury or accidental death.


    All Safe Life Defense body armor is professionally tested in labs and per NIJ standards. In a ballistic panel with one of our IIIA+ vests, we were able to fire 342 shots before failure. Although our armor is proven to withstand multiple hits, any armor that has been tested must be replaced immediately and cannot be used for protection as its integrity will have been compromised. Stopping a bullet is serious business and even a single shot WILL damage your armor no matter how great it is. If you would like to test shoot your armor, please do so in a safe environment with the assistance of a professional.


    How do I care for and clean my body armor?

    Body armor will need to be washed just like any other article of clothing, especially if you are wearing it on a daily basis! Cleaning a Safe Life Defense carrier is easy and can be done in a washing machine as long as the ballistic panels are removed before washing. Since air drying is the best way to ensure a long carrier lifespan, an extra carrier is recommended. Having a spare will allow you to transfer your ballistic panels into the clean carrier while your soiled carrier is properly cleaned. It is important that you never go without protection. For additional information, please read the following instructions carefully:

  • Essential Body Armor Warranties and Guarantees

    What guarantees should I look for when purchasing armor?

    Almost all body armor companies provide some type of guarantee along with a manufacturer’s warranty, but not all of these safeguards are created equally. Be sure you review and fully understand the scenarios in which each vest will be covered before you buy. If a business isn’t willing to back their products, that should tip you off to a potential safety hazard, fraudulent product marketing or just a bad customer service experience you’re likely to run into down the road. Safe Life Defense proudly stands behind all of our armor and the people who wear it by offering three types of guarantees on top of a traditional warranty. Check out our offerings below:


    The Fit Guarantee

    Safe Life Defense guarantees the proper fit of your body armor because we understand that it’s crucial to saving lives. If you feel your vest does not fit correctly, we’re more than happy to help you exchange it. All exchanges must be made within 30 days of delivery and be in their original condition.


    The Satisfaction Guarantee

    Your happiness is our priority. If you are dissatisfied with your Safe Life Defense body armor for any legitimate reason, simply send it back to us in its original condition and we will issue you a full refund for the cost of your product(s).


    The Incident Guarantee

    We stand behind our products and our customers. Should your Safe Life Defense body armor save your life, we promise to replace your armor at no cost to you. All you have to do is send us your compromised gear with an official incident or police report.


    The Manufacturer Warranty

    Safe Life Defense provides a 5-year manufacturer warranty on all of our ballistic panels and plates. We also offer a 2-year warranty on all of our carriers and our belts come with a lifetime warranty. In the rare instance that you encounter any defects, we’ll have your back.

  • Frequently Asked Questions
  • Can you travel with body armor?

    Body armor is legal in all 50 states and can be transported and worn over state lines. You cannot be arrested for wearing body armor, nor can your armor be confiscated if you are abiding by all of the local, state and federal laws in that particular area. In fact, flying with body armor is just as easy as traveling with a regular vest. You can either wear it on board, take it in your carry-on luggage or check it at the nearest baggage location. With this in mind, Safe Life Defense has created a specialized Body Armor Carry and Storage Bag to make transporting your gear a breeze.


    Does body armor have a lifespan?

    All body armor has a lifespan because even the world’s strongest ballistic materials degrade over time. It’s important that you’re aware of this information and confirm an expiration date with the manufacturer. The typical lifespan of soft armor is 5 years. Hard armor, like steel, can last 15-20 years. No matter the type you choose, it should come with a full manufacturer’s warranty that guarantees the ballistic panels from defects for your vests’ entire lifespan.


    Can I wear expired body armor?

    If your vest begins to show signs of wear and tear, is fitting differently or is near the 5-year mark, then it may be time to replace it. Although it has been proven that body armor does maintain some of its ballistic properties after the standard 5-year lifespan, vests past their intended shelf-life are not tested or rated for protection (and that’s on purpose). Expired vests have a higher likelihood of being penetrated and failing to protect the wearer.


    Another risk to consider here is that the internal components could lead to additional harm if they develop cracks or tears. You should expect to wear expired armor at your own risk, but if your vest is past its best-by date and you can’t afford something new, keep wearing it. Although not recommended, it is better to have some protection than none. Even expired armor has the potential to save your life.


    Can civilians own Level 4 body armor?

    The quick answer is yes, it is legal for a law-abiding civilian to buy Level IV (4) body armor. However, those with a felony record are prohibited from purchasing or using body armor like bulletproof vests and plate carriers. Level IV body armor will stop pistol rounds, rifle rounds, even 30-06 steel-core armor penetrating rounds!


    What is the highest-rated body armor?

    Level IV (4) is the highest rating of personal body armor. There is no such thing as Level V (5) body armor at this time. Be mindful of dangerous and expensive online scams that say otherwise. These parties are claiming to have something that simply doesn’t exist and you don’t want to be deceived by a falsely advertised product. Any armor you purchase should have compliance testing results and be National Institute of Justice (NIJ) approved.


    How do I buy body armor?

    Body armor is an unregulated product, which means it does not require any special identification, paperwork or a background check. Many companies choose to restrict their sales to law enforcement and similar agencies, but at Safe Life Defense, we believe all law-abiding citizens have the right to purchase personal protection equipment. Body armor is a preventative safety product incapable of causing harm and you can purchase your own in-person or online.


    Can I purchase body armor online?

    Civilians and professionals can purchase body armor online in most areas of the U.S., but due to local legislation, residents of Connecticut must make the purchase at one of our dealer locations. You can order via our Body Armor Shop just as you would with any other website! If you choose to make an online purchase, make sure the manufacturer has a fit guarantee like Safe Life Defense because the fit of your vest is crucial to your safety while wearing it. We do our best to keep all items in stock and provide same-day shipping on all orders placed before 5:00 p.m. PT (unless they are customized). You may also contact us by phone at 702-829-4029 to place an order.


    Will AK-47 penetrate body armor?

    This answer depends on the type and level of body armor, as well as the kind of round being fired. You need sufficient armor to defeat threats up to 7.62x54R that is frequently used in large caliber rifles. A FRAS™ plate on its own can stop up to 7.62×39 lead core ammo and a Level IV ICW hard armor plate on its own can stop up to 30-06 steel-core armor penetrating rounds. A NIJ Level IIIA or IIIA+ plate in combination with either of the above options is also able to stop AK-47 rounds. Backface deformation is also important to consider. This signature is the amount of damage created on the backside of a piece of armor after impact.


    Will body armor stop a 12 gauge slug?

    The ability to stop a 12 ga. depends solely on the type of body armor you choose. With a good armor setup, you can stop this type of threat. A slug will not penetrate Level IIIA, IIIA+, IV and FRAS™ plates. Nevertheless, trauma can still be significant.


    Will body armor stop 00 buckshot?

    This type of shotgun pellet has poor penetration through plates and can be easily stopped with the right kind of body armor. Any vest rated to halt a 32 ACP pistol shot (usually level II and above) will stop 00 buckshot. You’ll want to look for Level II, III, IIIA, IIIA+, IV and FRAS™ plates.


    How effective are bulletproof vests?

    Technically speaking, bulletproof vests don’t exist (body armor does). Body armor is a life-saving tool capable of preventing fatal injury to the wearer. It’s specifically engineered to withstand being penetrated by certain types of bullets and distributes the impact energy more evenly across the surface. This decreases the chances of blunt force trauma through the deformation of the slug upon impact.


    Does body armor work?

    Whether for personal or professional use, it’s safe to say tens of thousands of lives have been saved worldwide because of body armor. The Police Executive Research Forum (PERF) has conducted studies on the effectiveness of body armor in saving lives, and results have shown that by not wearing ballistic armor, police officers are 14 times more likely to die from an injury on the job. So, yes, this is a critical piece of equipment that truly saves lives. Body armor works.


    Can you wear body armor in public?

    There is no law against you wearing protective gear in public and it is not illegal. Nonetheless, we suggest you do so discreetly. Should you choose to openly display your body armor, you can expect to draw extra attention from both the public and local law enforcement. A friendly and nearly unavoidable conversation with your local police department is likely to happen, as such open displays can strike fear into those around you and signal imminent danger. Be sure to check your local laws for caveats, like Louisiana’s, that prohibit wearing armor on school property or at school-sponsored functions.


    How much does body armor cost?

    The cost of body armor can range anywhere from around $300 to well over $3,000. At first glance, this may seem expensive, but you have to take into account what you need and what you’re actually getting. In our opinion, a beating heart is priceless. This doesn’t mean you should choose the option with the highest price tag. It means that you should get exactly what you need at the investment price you can afford. While some individuals may only be purchasing basic plates, others may go for a vest upfit or a full ballistic uniform.


    In either case, you must consider how trustworthy the brand, technology and testing is, along with your own expectations for performance. What matters more to you; comfort, weight, mobility, durability, concealability, protection level, warranties, funding assistance, donations or payment plan options? Do your research and heavily consider your options. Afterall, you can never put a value on the ability to live to see another day.


    How much does body armor weigh?

    Without carriers, most plates range from .51 lbs – 13.7 lbs. Of course, this depends on the type of plate you’re choosing and what you need to protect yourself against. Weight can range widely based on the thickness, material makeup and coverage area. You may only choose front and back panels or you may want to add side armor (read more about installation here), other accessories and layer certain ICW plates for added protection.


    A soldier’s plate carrier system typically weighs 22lbs. Generally speaking, you can expect your entire setup (with two plates) to weigh anywhere from 15 – 35 lbs. Of course, this all depends on the factors mentioned above, along with your size and any extra gear you need to attach to the vest.


    How do I tell which plate is the front plate and which is the back plate?

    In nearly all cases, you should order the same type of plate for the front and the back of your carrier. And believe it or not, it does matter which side of the plate is facing the threat. This is crucial for both comfort and safety. Most hard plates have a side that will be labeled front. This is the strike face, which is intended to take the initial hit from a bullet.


    The strike face should be positioned away from your body, and if your plate has a curve to it, that curve should follow the natural contour of your body (both in regards to the chest and the upper back). Be warned, if you wear a back plate with the concave side facing out and have it aligned more with the lower back, you may compromise your safety and cause significant back issues from carrying extra weight so low for an extended period.


    Is body armor stab-proof?

    Ballistic armor, also known as bullet-resistant or bulletproof, is the most common type of body armor. However, that doesn’t mean that it will protect you against weapons that are capable of stabs or slashes. If a vest is stab or spike resistant, it is meant to protect against threats like needles, screwdrivers and ice picks that can pierce between fabric threads. If a vest is slash-resistant, it is meant to protect against attacks utilizing bladed tools.


    As always, ensure you’re selecting the body armor that suits your particular needs best but do so knowing that a significant number of attacks involve these types of weapons. We recommend protecting yourself from as many threats as possible with body armor that covers all of your bases, like Safe Life Defense’s products.


    What does the + stand for on Level IIIA+, and why isn’t it on the NIJ website?

    Although the National Institute of Justice website does not list or officially recognize Level IIIA+, this is a legitimate classification. We pioneered this new label to take into account that our IIIA+ protects against more than a normal Level IIIA in their current testing procedures. This is reflective of ingenuity and increased safety capabilities, and in the eyes of the NIJ, a IIIA+ is in alignment with IIIA standards. In light of this, Safe Life Defense will be pushing to update the existing testing standards to include evaluation and testing of new technology.


    Is there a difference between a carrier and vest or plate and panel?

    There are significant differences between a body armor carrier, plate, panel and vest. Knowing why they’re different and how they’re intended to be used is vital to your safety.


    A carrier is typically an outer shell made of fabric in which the ballistic panels (or plates) can be placed. This is what allows you to actually wear your armor panels. Body armor carriers can be worn both over clothing and under for concealed functionality. A carrier on its own offers zero protection from deadly-force weapons, but can be outfitted with gear such as magazine holsters and MOLLE attachments.


    A body armor plate or panel, also known as a ballistic or bulletproof plate or panel, is the internal armor intended to fit into a carrier. Depending on the rating of the plate, this element is capable of protecting the wearer from life-threatening injuries due to contact with weapons or blunt-force impact. A panel is essentially the exact same concept as a plate, but it is soft instead of hard.


    Body armor vests are an all-in-one option that typically come with everything you need to safeguard your center mass. They’re similar to a carrier and plate or panel combination, but don’t require you to purchase extra parts (unless you want to of course). Most vests are made from soft body armor that makes for superior coverage and a sleek fit, and they can be worn both externally or under clothing. The Enhanced Multi-Threat™ IIIA+ Vest is one of the level options offered by our team, and it’s the only soft body armor to achieve this advanced level of protection!


    What is concealable body armor?

    Concealable body armor is arguably one of the most versatile and practical types you can own. It is designed to be worn under day-to-day attire or a work uniform for discretion. The idea behind this style is that it is low-profile enough to remain as hidden as possible, while still maintaining its protective capabilities. Ideally, all carrier elements, vest selections, panel add-ons and accessories (like fasteners) will show minimally or not at all through your outer layers.


    How can I find the best body armor manufacturer?

    There are many things to consider when narrowing down which body armor manufacturer you’d like to purchase from. First, you’ll want to verify that the products you’d like to obtain are NIJ rated. You’ll need to look for proof of this in the form of a certification sheet or testing results. Without this evidence, you cannot be sure that any manufacturer’s claims are truthful.


    You’ll also want to look into all of the warranties and guarantees offered by said company. All body armor should be backed by a manufacturer’s warranty that covers at least 2 years on your carrier and 5 years on your ballistic plates and panels. As far as guarantees go, make sure you consider things like your body armor not fitting correctly or what would happen if you were involved in an incident and your gear was compromised. You’ll want some type of an exchange and a replacement guarantee, along with a good customer service experience because when you buy armor, your needs don’t stop at the point of sale. Choose a manufacturer that will support you before, during and after you open your wallet.


    How comfortable is it to wear body armor?

    Believe it or not, body armor can be comfortable, but the level of comfort can vary depending on each person’s wants, needs and physical stature. Taking into account how long you’ll be wearing it on average, the conditions of your environment and the gear you need to carry on your person will all help you narrow down your search. From there, you can also consider various materials and their weight, the cut of your body armor, and thickness or flexibility. Safe Life Defense’s concealable body armor and FRAS™ are two of the most comfortable options on the market, and have been rated #1 in comfort by our customers.


    How do I know what size of body armor is right for me?

    Finding your correct size in body armor can be tricky, but not if you have reliable support. New buyers are encouraged to connect with our expert team in house. You can also utilize the Safe Life Defense Fit Guide tool (located on each product page) to narrow down your options. Regardless of your results, we suggest your make a selection carefully and reference our unisex sizing chart as well. We want to make this decision as quick, easy and seamless as possible for you. That’s why we also offer free size exchanges for 30 days.


    It’s key that you know that the standard sizing for body armor typically does not fall in line with the standard retail sizing you might find at your local stores. If you are a size large in street clothing, that does not mean you will be a size large in body armor. Fit will vary widely based on your body type, height, weight and structure. Due to anatomical differences between men and women, other considerations may need to be made when it comes to bust size or coverage gaps around the torso.


    What does Berry Compliant mean?

    The Berry Amendment Compliance is a federal regulation that requires Department of Defense funds to be spent on U.S. manufactured items in order to protect the United States industrial market during times of war. It is intended for companies that wish to acquire Department of Defense contracts, and applies to products such as food, clothing, tents, materials, and tools. Companies wishing to obtain compliance must guarantee that their products (including all components) are 100 percent domestic.


    What is Berry Compliant body armor?

    If armor (or any product) is Berry Compliant that means it adheres to the Berry Amendment, a piece of United States legislation for the Department of Defense that gives preferential treatment to product creators who produce, grow and manufacture their wares in the United States. The Berry Amendment Strengthens the American Economy and National Security.

Get In Touch

We will get back to you within 12 hours.

Send

Latest News

Questions or orders? Contact us

Chowey is your best consultation object about military & police equipment

Are you looking for a professional manufacturer of military and police equipment, or you want to inquiry professional answers? please contact us. We will give you professional feedback within 12 hours. You can rely on our full-service capabilities.

Contact Chowey

Copyright © Ningbo Chowey Police Equipment Co., Ltd. All Rights Reserved.

Get In Touch With Us

We will get back to you within 12 hours.

Send

Leave Your Message